5 Tips For A Fast And Easy Paint On Bed Liner

We installed a paint on bed liner on our old truck.  It’s difficult to believe how a low-cost roll on bed liner improves the looks of an old truck.  It’s not just about looks either.  You get some protection for the bed and it is not extremely tough to get it accomplished.  Here’s what we learned…

Tip 1:  Clean to commence.

Paint won’t stick to wax or grease.  Get you some automotive cleaner and use it to start.  Do that prior to you commence sanding.  Sanding before cleaning drives the grease or wax into the paint.  That’s not what you want, so clean initial.

Tip 2:  Sand like crazy.

No fine sanding is necessary.  What you want is some really rough sanding.  Following you sand some, use a really coarse sanding pad.  Really scratch up the surface for the greatest outcomes.  That’s the ticket to a actually rough surface that makes that paint hold just correct.

Tip 3:  Get 1 more quart.

A full size truck bed takes at least five quarts.  1 gallon isn’t enough.  Get far more.  See professional spray on liner use about four gallons of paint, so do not cut corners.  Get a lot more.

Tip four:  Roll or spray.

You can spray if you want, but rolling looks just as great.  The paint is thick and as it dries all the roller marks or brush marks just smooth proper out.  Rolling works perfectly.  Even brushing the paint on leaves a excellent searching finish.

Tip 5:  Plasti-Kote it…

On our truck we used Plasti-Kote bed liner paint.  It’s held up well now for over two years.  It’s good stuff.  Also well-liked are Herculiner paint and the Dupli-Color products.